Re: NEC-LIST: 4NEC2 for larger segments

Arie, et al,

 When generating Nec output data, there is a user interface screen that
pops up. Selection are: use original; Far Field pattern, use frequency
loop, Near Field pattern.

If I wanted to do a near field scan for a set of frequencies, how do I
set this up? Can I place an NE cards in the .nec file, then select 'use
frequency loop? Would I then get Near Field data for each frequency in
the output?

Thanks,
Ken Carrigan

-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list