Re: NEC-LIST: Copper oxide.

From: <bobh_at_email.domain.hidden>
Date: Sun, 11 Jan 2004 16:44:04 -0800 (PST)

If you have NEC4 or the Ohio State Thin Wire Program, you can approximate
the effect of a thin coating on an antenna. The programs are really
intended for insulation on wires, but loss is allowed, so copper oxide
should be ok.
My own work is limited, byte I have found thin coatings such as enamel on
wire to have negligible effect. An approximate solution was published in
Communication Quarterly as Insulated Antennas.

bob w4mb

-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list

Received on Mon Jan 12 2004 - 00:44:15 EST

This message: [ Message body ]
Next message: 4nec2_at_email.domain.hidden: "Re: NEC-LIST: Why the 30 wire connection limit in Nec ?"
Previous message: Pat W_: "NEC-LIST: Why the 30 wire connection limit in Nec ?"
Maybe in reply to: D. B. Miron: "NEC-LIST: Copper oxide."
Next in thread: D. B. Miron: "Re: NEC-LIST: Copper oxide."
Reply: D. B. Miron: "Re: NEC-LIST: Copper oxide."

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:44 EDT