Re: NEC-LIST: LD 0 command in NEC4.

Thanks Jim, Joe, and L.B.,

After reading your replies, I ran the listing again, and
looked at the DOS screen afterwards with more care. There
was a run-time error message, "invalid REAL". So, I wrote
the inductance as "5.0E-6" and it ran. It seems odd to me
that the "13" in the GN command passes okay. The version of
NEC4 that I'm using was compiled in '96 directly from the
LLNL source. Apparently the GNEC version is not fussy about
integers appearing in float positions, as is the case with
NEC2DSX***.exe.

Doug Miron

-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list