Re: NEC-LIST: RP card format

Good day Marvin,

I'm not certain, but I don't think you can do what you want with a single RP
command. I believe there is one parameter to specify the distance for the
field value, if desired. To get a distance sweep, you will need a separate
RP command for each distance. I assume you have a copy of the User's Manual
in some format, so you can look up the syntax.

Doug Miron

"Marvin Brewer" <mbrewer_at_lbagroup.com> writes:

I'm new to GNEC and need assistance with the RP card. I would like tabular
data of electric field strength vs. distance for an electrically short, top
loaded monopole operating at 300 kHz. Could someone please share the
correct format for the RP card, or, if I'm totally off track, point me back
in the right direction.

Thanks,

Marvin L. Brewer
Senior RF Engineer
LBA Technology

Office 252-757-0279
Direct 252-317-2135
Fax 252-752-9155
Cell 252-347-2111
mbrewer_at_lbagroup.com

-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list
-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.16.8/621 - Release Date: 1/9/2007 
1:37 PM
-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list