Re: NEC-LIST:nec2 newbie question: Biconical antenna

From: Davor Virkes <davor.virkes_at_email.domain.hidden>
Date: Thu, 17 Oct 2002 08:42:03 +0200

Hi,

>The antenna should be connected to a spectrum analyzer via BNC or
>N-Connector (50 ohms).

Discones are much better suited for excitation with coax, and are easily
built. In this configuration, it could be designed as a snap-on, and used
as a handy reference antenna for signal level measurements eg. for micro
and pico cells.

Davor

-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list

Received on Thu Oct 17 2002 - 06:44:20 EDT

This message: [ Message body ]
Next message: rsmueller: "Re: NEC-LIST:nec2 newbie question: Biconical antenna"
Previous message: Joe: "Re: NEC-LIST:nec2 newbie question: Biconical antenna"
In reply to: Stefan Frank: "NEC-LIST:nec2 newbie question: Biconical antenna"
Next in thread: Brent DeWitt: "RE: NEC-LIST:nec2 newbie question: Biconical antenna"
Reply: Brent DeWitt: "RE: NEC-LIST:nec2 newbie question: Biconical antenna"
Reply: Stefan Frank: "NEC-LIST:Re: nec2 newbie question: Biconical antenna"

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:42 EDT