Hello, again, and thanks for all the replies from this morning. One
problem appears to be that I was using NEC 4.1 source code that I had
modified to remove the 10,000 segment limitation and allow MAXSEG in
the NECPAR file to be the sole source of this parameter. When I used
the unmodified NEC 4.1 source code I obtain the same results as with
the other platforms modelling the cone. I'll have to recheck the NEC4
mods that I had implemented. As to why NEC2 and NEC4 report
different results I'm not sure. Sincerely,
--
__ __ ______ __ John Wood
/ |\ / /\ / ____ \ / /\ Code 5551
/ | ||/ / / / /\__/ /| / / / U.S. Naval Research Lab
/ /| |/ / / / /_/_/ / / / / / 4555 Overlook Avenue, SW
/ / | / / / ___ / / / / / Washington, DC 20375-5337
/ / /| / / / /\_| |\_/ / /_/_ (202) 767-2608
/_/ / |_/ / /_/ / |_|| /_____/\ (202) 767-3377 (FAX)
\_\/ \_\/ \_\/ \_\| \_____\/ e-mail: wood_at_itd.nrl.navy.mil
WWW: http://server5550.itd.nrl.navy.mil
DOST THOU LOVE LIFE? THEN DO NOT SQUANDER TIME, FOR THAT IS THE
STUFF LIFE IS MADE OF. - Benjamin Franklin
--
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list
Received on Tue Jul 09 2002 - 18:48:42 EDT
This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:42 EDT