Re: NEC-LIST:comments and sub-sections

The only method that I know works, is to move the unwanted cards to
after the EN card. Depending on what you want to achieve, you could
put a GE, followed by an EN card.

Brent DeWitt wrote:
>
> Is there a way to "comment out" sections of a NEC2 geometery input file?
> I've tried moving the GE card up, but I get an error on the first GW card
> after it and that aborts the run. It also seems that CM/CE cards aren't
> allowed after the first geometry card.
>
> Any help would be appreciated!
>
> Brent DeWitt
> --
> The NEC-List mailing list <nec-list_at_gweep.ca>
> http://www.gweep.ca/mailman/listinfo.cgi/nec-list

-- 
sringe_at_actrix.gen.nz, 
Steve.Inge_at_ieee.org-------------------------------
Steve Inge, ZL2BDV, RF Engineering Analyst. Island Bay, Wellington, New
Zealand.
Phone +64 4 3838 422, Fax: +64 4 3838 691.  Mobile +64 25 463 330.
-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list