Re: NEC-LIST: EZNEC Freq Sweep Plots

It's easy to plot out the source R and X. I asked Roy and he told me that
after the frequency sweep, the file called "LastZ" contains this data.
Importing into excel is done like any other .dat file.

Good luck!
Mark, AA4MF
----- Original Message -----
From: "Dan Maguire" <bethdan_at_pacbell.net>
To: <nec-list_at_gweep.ca>
Sent: Thursday, March 21, 2002 8:42 PM
Subject: NEC-LIST: EZNEC Freq Sweep Plots

> Users of the EZNEC program know that several different types of
information
> can be placed into the frequency sweep "Data File", including source data,
> load data, and pattern analysis data. All of this is controlled via the
> Frequency Sweep panel that you see by clicking Setups then Frequency Sweep
> on the main EZNEC window.
>
> I wanted a way to plot this information without having to do a lot of cut
> and paste or manual entry of the numbers into a spreadsheet, so I wrote an
> Excel application called EZPlots to automate the process. EZPlots can
read
> the Data File that may be produced with an EZNEC frequency sweep and then
> generate plots such as Max Gain vs. frequency, Front/Back ratio versus
> frequency, Source R and X versus frequency, etc., as well as the standard
> SWR plot that EZNEC itself can show.
>
> I'm happy to share the EZPlots program with anyone who wants it. More
> details and a free download file may be found at
> www.qsl.net/ac6la/ezwpintro.html . Requires Excel 97 or later.
>
> 73,
> Dan AC6LA
> --
> The NEC-List mailing list <nec-list_at_gweep.ca>
> http://www.gweep.ca/mailman/listinfo.cgi/nec-list

-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list