NEC-LIST: how to add a matched load to multi-conductor TL

From: Song <song2ru_at_email.domain.hidden>
Date: Tue, 22 Sep 2009 13:15:21 -0400

Hello,

I am modeling multi-conductor transmission lines with a matched load. Can
anybody tell me how to add a matched load in 4nec2? All I find in the help
doc is to add a matching network to match an antenna to a given
characteristic impedance (known in advance). How to match a transmission
line if its Z0 is not known explicitly? Any hints will be appreciated!

Song

-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list

Received on Tue Sep 22 2009 - 17:14:26 EDT

This message: [ Message body ]
Next message: Lux, Jim (337C): "Re: NEC-LIST: how to add a matched load to multi-conductor TL"
Previous message: GrantBingeman_at_email.domain.hidden: "NEC-LIST: 190 degree monopoles"
Next in thread: Lux, Jim (337C): "Re: NEC-LIST: how to add a matched load to multi-conductor TL"
Reply: Lux, Jim (337C): "Re: NEC-LIST: how to add a matched load to multi-conductor TL"

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:46 EDT