Re: NEC-LIST: Cylinder connected to Ground by a Wire

From: Roy Lewallen <w7el_at_email.domain.hidden>
Date: Tue, 17 Feb 2009 17:47:58 -0500

I can only offer a general suggestion: Double precision NEC is much more
tolerant of short segments and a number of other things than single
precision code. You didn't mention which you were using. If you're using
single precision, a switch to double precision code might be all that's
necessary to solve the problem.

Roy Lewallen

-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list

Received on Tue Feb 17 2009 - 22:47:43 EST

This message: [ Message body ]
Next message: D. B. Miron: "Re: NEC-LIST: Cylinder connected to Ground by a Wire"
Previous message: VICTOR VAN LINT: "NEC-LIST: Cylinder connected to Ground by a Wire"
In reply to: VICTOR VAN LINT: "NEC-LIST: Cylinder connected to Ground by a Wire"
Next in thread: D. B. Miron: "Re: NEC-LIST: Cylinder connected to Ground by a Wire"

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:46 EDT