NEC-LIST: RF Voltage Levels

Jeff,
I'm not sure this is what you are looking for, but the fields on the wire
are, by necessary electric field boundry conditions, the same as the fields
in the adjacent "near fields". Use the "NE" card to set up a near field
plot for your antanna starting at the wire center and going out a short
radial distance from the wire. See the help instructions or the NEC
documentation for assistance. The fields will be reported in Volts per
meter and can be plotted as a function of the position along the wire or
structure. You can also check your *.nou output file for the printed
values associated with each segment.

Best regards,
Paul Lynas

-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list