I have been working a few weeks on a project that may get me labeled
as an idiot or crazy or any combination thereof.
I had purchased the two volume set of documentation for NEC-2
many years ago from NTIS. Not being a fan of the quality of
the reproduction I have decided to redo them using LaTeX and
some 3D graphics routines.
I am within a few weeks of getting all three parts completed.
It is just a matter of searching for typos and creating a
few data sets. It is my hope that some one in this group
has done a couple of checks on code segments shown in the manuals.
In Part I: any one have the data for Figures 7-11? I
can easily plot the results.
Also the RCS plots for a conducting sphere? Figure 4 in Part III.
If any one has interest, I'd be interested in any
typos you find in the following. Don't kill trees
by printing these off just yet. It is work in progress.
http://www.commspeed.net/k7qo/NECpart1.pdf
http://www.commspeed.net/k7qo/NECpart2.pdf
http://www.commspeed.net/k7qo/NECpart3.pdf
You will note that these take about 1/10 of
the storage requirements of the most common
PDF versions of photocopies of the manuals.
For the code listing, due to mods over the years,
the references to line numbers will be incorrect
until I finalize which version to use. At that
time I'll use the most recommended version of NEC-2
that will run under Linux.
FYI es thanks in advance,
Chuck Adams, K7QO
-- The NEC-List mailing list NEC-List_at_robomod.net http://www.robomod.net/mailman/listinfo/nec-listReceived on Mon Jul 16 2007 - 13:34:56 EDT
This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:46 EDT