Re: NEC-LIST: 4NEC2 for larger segments

Hi Bill and All,
I suppose that the problem of normalization is due to the setting in 4nec2.
If you see in:

Settings->Input Power

you can find the power at which the 4nec2 normalizes the output showed in
the 3D window.

The default value for this setting is 100 Watt.
The values printed from the nec2XX.exe file in the *.out file are the
real values generate from your "EX" card in the *.nec file.
So the 4nec2 take this values and normalize the rapresentation for to
obtain an output power set in the "Settings".
If you wonna see in the 3D window this values you must set the input
power to 0 (Zero) Watt.

I hope that this is a good suggest.
Bye.
Mirko

>At 02.58 28/04/2005, you wrote:
>Bill thanks,
>I'll try that, and maybe even modify the output file (split it up) to
>read in each plot to use the DirectX.
>
>I've got a bug I think in the running the .nec file as every time it
>runs the input power is always normalized to 100Watts.
>
>I use the command:
>EX 0 3000 1 00 50 0 'E-Field Dipole
>excitation
>But it gives me different values for voltage induced, with 100Watts.
>Weird!
>How do you overcome this?
>v/r
>Ken Carrigan

Mirko Dionisi
ABS - Electromagnetic Analysis
Consulting Engineer
I.S.L. - Ingegneria dei Sistemi Logistici
ALTRAN Group
Via del Marmiceto 6/C,
56121 Ospedaletto (PISA) - Italy
Mail: mirko.dionisi_at_isl-altran.it
Web: www.isl-altran.it

This message powered by EMUmail. http://EMUmail.com

-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list