Re: NEC-LIST: Coil-loading.

I'll measure a coil this week and compare it to calculations. My
calculations could be off. It does sound like you have performed many
measurements on real inductors.

   Dave Cuthbert

-----Original Message-----
From: nec-list-bounces+drcuthbert=micron.com_at_robomod.net
[mailto:nec-list-bounces+drcuthbert=micron.com_at_robomod.net] On Behalf Of
Jacob Schanker
Sent: Monday, February 07, 2005 9:57 AM
To: nec-list_at_robomod.net
Subject: Re: NEC-LIST: Coil-loading.

Dave:

I would believe 1000 only if I saw it.

I've done a lot of high Q inductors over the years, from silver plated
oxygen-free copper tubing for 4 kW antenna multicouplers to litz wire on
fiberglass 6 inch diameter coils for LF antenna tuners, but to the best
of
my recollection, 450 or so was about the Q limit I achieved. I've also
done
helical resonators for preselectors, and don't think I reached even
close to
1000. That doesn't mean that some better engineer couldn't outdo me, but
pretend I'm from Missouri (Rolla, if you like) and show me. :)

Regards,

Jack

Jacob Z. Schanker, P.E.
65 Crandon Way
Rochester, NY 14618

Tel: 585 442 3909
Fax: 585 442 2182
j.schanker_at_ieee.org

<drcuthbert_at_micron.com> writes:
> Doug,
>
> A Q of 300 can be achieved with close spacing of the windings on a
> dielectric rod. A Q of nearly 1000 can be achieved with a properly
> designed air-core solenoid inductor.
>
> Dave Cuthbert
> Micron Technology
>
> -----Original Message-----
> From: nec-list-bounces+drcuthbert=micron.com_at_robomod.net
> [mailto:nec-list-bounces+drcuthbert=micron.com_at_robomod.net] On Behalf
Of
> D. B. Miron
> Sent: Monday, February 07, 2005 8:35 AM
> To: nec-list_at_robomod.net
> Subject: Re: NEC-LIST: Coil-loading.
>
> Good day,
>
> Jim is right about the original question. I have a 1943
> copy of Terman and I don't see anything about coil loading.
> He has a very brief paragraph on automobile antennas in
> which he mentions the whip, and plate antennas.
>
> A related question is about coil Q. I read somewhere that
> the maximum practical Q or an air-core solenoid is about
> 300. Does anyone disagree, or have different experience?
> Thanks.
>
> Doug Miron
>
> --
> The NEC-List mailing list
> NEC-List_at_robomod.net
> http://www.robomod.net/mailman/listinfo/nec-list
>
> --
> The NEC-List mailing list
> NEC-List_at_robomod.net
> http://www.robomod.net/mailman/listinfo/nec-list
>
>

-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list
-- 
The NEC-List mailing list
NEC-List_at_robomod.net
http://www.robomod.net/mailman/listinfo/nec-list