Re: NEC-LIST: Significance of ?/10 segments in dipole design

Yes lambda/10 would be the upper limit. You can explore this by modeling
the dipole with an increasing number of segments. At some point the
impedance and resonant impedance will level off.

    Dave Cuthbert
    Micron Technology

-----Original Message-----
From: nec-list-admin_at_gweep.ca [mailto:nec-list-admin_at_gweep.ca] On Behalf
Of Azmat Bhatty
Sent: Monday, July 12, 2004 5:50 AM
To: nec-list_at_gweep.ca
Subject: NEC-LIST: Significance of ?/10 segments in dipole design

I'm trying to design a dipole antenna and I was told that my segments in
my
design should be no greater than (labmda/10) per segment. Is this true
and
is it a good idea to implement it in my design code?

Azmat Bhatty
ISR-2-Engineering Tech
Phone: 1-(505)-665-1902
E-mail: abhatty_at_lanl.gov

-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list
-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list