To expand on Jerry Burke's comments, I've recommended to users of NEC-2
based EZNEC that they make a "connection" to Sommerfeld ground by
placing some radial wires just above the ground and connecting to their
center. It only takes a few radials to get an effective ground
resistance considerably lower than a typical Beverage termination. The
difference at the far end is made up with a single resistive load.
Roy Lewallen
-- The NEC-List mailing list <nec-list_at_gweep.ca> http://www.gweep.ca/mailman/listinfo.cgi/nec-listReceived on Sat Jan 05 2002 - 21:35:17 EST
This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:42 EDT