Re: NEC-LIST:Boom presence with NEC2

Pino,
Increase the "diameter" of your wire "boom" to 10% or so of the element
length. See any effect of the "boom" at that size? If not, you will have to
put more wire segments in your "boom". 4 axial wires ought to be OK, with
"quad" crossties every 0.05 wavelength or so (emulating the tubular boom
with a square cross-section one).
..Trevor Marshall..

At 08:15 PM 10/26/01 -0300, you wrote:
>Can somebody suggest me how to take in account the presence of a metallic
>boom with elements connected to it for a yagi analized with NEC2 ?
>
>I have tried with asingle wire as long as the antenna and with many wires
>between one alement and the following but with no effect.
>
>Thanks in advance.
>
>Pino ZP4KFX
>
>********************** San Pedro 26-Oct-01 20:05:59 *****************
>* Giuseppe Zollo | San Pedro de | http://www.qsl.net/zp4kfx *
>* | Ykuamandyju' | *
>* | Paraguay | pinoz_at_telesurf.com.py *
>* (Pino) | tel. xx595.42.2626 | *
>*_________________| tel. xx595.21.506451 | zp4kfx_at_amsat.org *
>* GG15lv | cel. xx595.981.940924| i2kfx_at_amsat.org *
>***********************************************************************
>--
>The NEC-List mailing list <nec-list_at_gweep.ca>
>http://www.gweep.ca/mailman/listinfo.cgi/nec-list
>

-- 
The NEC-List mailing list <nec-list_at_gweep.ca>
http://www.gweep.ca/mailman/listinfo.cgi/nec-list