Good day all.
Some time back my brother, Dirk Baker, published a paper dealing with
feeding a normal helix from the side, instead of the center. He used,
as I recall, a Hecklen taper. I will try to locate the reference and
post it to the group.
Best regards,
Duncan.
-- *************************************************************** Prof. Duncan C. Baker (Pr. Eng., FIEEE, FSAIEE, Sci. Nat.) Dept. of Electrical Electronic and Computer Eng., University of Pretoria, 0002 Pretoria, SOUTH AFRICA. Editor, IEEE Region 8 News. Region 8 Homepage - http://www.ewh.ieee.org/reg/8/ or http://www.ieee.org/regional/r8/ PHONE +27 12 420 2775 (OFFICE), +27 12 361 7480 (HOME) FAX +27 12 362 5000 (OFFICE), +27 12 348 5314 (HOME) E-MAIL: University: dbaker_at_postino.up.ac.za IEEE alias address: duncan.baker_at_ieee.org Private server address: apc_at_acenet.co.za LOCAL STANDARD TIME = UT+2 HOURS **************************************************************** [demime 0.97c removed an attachment of type text/x-vcard which had a name of dbaker.vcf] -- The NEC-List mailing list <nec-list_at_gweep.ca> http://www.gweep.ca/mailman/listinfo.cgi/nec-listReceived on Mon Oct 08 2001 - 04:20:54 EDT
This archive was generated by hypermail 2.2.0 : Sat Oct 02 2010 - 00:10:41 EDT