Current source with dipole

Hello Peter,

I am not sure why you are getting the sqrt error but I don't believe that
you want to use the current source on the excitation card. There is
a problem with that current source and you only want to use it in certain
situations.

One of the ways to implement a current source is to place a point
far out in space with the gw card.

GW 901 1 9901.0000 9901.0000 9901.0000 9901.0001 9901.0001 9901.0001 .00001

You then connect a voltage source to this point (placing the values you want
for the current source in the
real and imaginary place holders ).

EX 0 901 1 0 1 0

You then use a network card from the point to the location
on the antenna where you want the source.

NT 901 1 1 5 0 0 0 1 0 0

This method will simulate a current source and it will also allow
you to be able to use a ground plane.

Good luck,

Joe Finnerty
jdf112_at_psu.edu
Paragon Technology
Received on Fri Jan 26 1996 - 15:30:00 EST